Disclaimer: Use coupon code SUMMERREAD305 at checkout and receive 10% off The Linux Command Line. Maximum savings with this promotion is $10. You can only use the code once per account, and you can't use this coupon in combination with other coupon codes. This great offer ends on June 30, 2010 at 11:59 PM so try not to procrastinate! While very unlikely we do reserve the right to change or revoke this offer at anytime, and of course we cannot offer this coupon where it is against the law to do so.
Thursday, June 10, 2010
New Discount Offer For The Linux Command Line
I recently got a notice from Lulu stating that, for a limited time, you may receive a 10% discount when you order a printed copy of The Linux Command Line. Details from the notice are as follows:
Thursday, June 3, 2010
My Top 5 Bash Resources
Over the course of writing The Linux Command Line and this blog, I've had frequent need of good reference resources for command line programs including the shell itself, bash. Here is my list of the ones that stand out:
Chet Ramey is the current maintainer of bash and he has his own page. On this page, you can find version information, latest news, and other things. The most useful document on the Bash Page is its version of the Bash FAQ. The NEWS file contains a concise list of features that have been added to each version of bash.
1. The Bash Man Page
Yeah, I know. I spent nearly half a page in my book trashing the bash man page for its impenetrable style and its lack of any trace of user-friendliness, but nothing beats typing "man bash" when you're already working in a terminal. The trick is finding what you want in its enormous length. This can sometimes be a significant problem, but once you find what you are looking for, the information is always concise and authoritative though not always easy to understand. Still, this is the resource I use most often.
Perhaps in response to the usability issues found in the bash man page, the GNU Project produced the Bash Reference Manual. You can think of it as the bash man page translated into human readable form. While it lacks a tutorial focus and contains no usage examples, it is much easier to read and is more usefully organized than the bash man page.
3. Greg's Wiki
The bash man page and the Bash Reference Manual both extensively document the features found in bash. However, when we need a description of bash behavior, different resources are needed. The best by far is Greg's Wiki. This site covers a variety of topics, but of particular interest to us are the Bash FAQ which contains over one hundred frequently asked questions about bash, the Bash Pitfalls which describes many of the common problems script writers encounter with bash, and the Bash Guide, a useful set of tutorials for bash users. There are also several fun to read rants.
Like Greg's Wiki, the Bash Hackers Wiki provides many different articles relating to bash, its features, and its behavior. Included are some useful tutorials on various programming techniques and issues with scripting with bash. While the writing is, at times, a little chaotic, it does contain useful information. Heck, they even trash my Writing Shell Scripts tutorial (Hmmm...I really ought to fix some of that stuff).
Chet Ramey is the current maintainer of bash and he has his own page. On this page, you can find version information, latest news, and other things. The most useful document on the Bash Page is its version of the Bash FAQ. The NEWS file contains a concise list of features that have been added to each version of bash.
There you have it. Enough reading to keep even the most curious shell user busy for weeks. Enjoy!
Tuesday, June 1, 2010
Using Configuration Files With Shell Scripts
If you have worked with the command line for a while, you have no doubt noticed that many programs use text configuration files of one sort or another. In this lesson, we will look at how we can control shell scripts with external configuration files.
Why Use Configuration Files?
Since shell scripts are just ordinary text files, why should we bother with additional text configuration files? There are a couple of reasons that you might want to consider them:
Sourcing Files
Implementing configuration files in most programming languages is a fairly complicated undertaking, as you must write code to parse the configuration file's content. In the shell, however, parsing is automatic because you can use regular shell syntax.
The shell builtin command that makes this trick work is named source. The source command reads a file and processes its content as if it were coming from the keyboard. Let's create a very simple shell script to demonstrate sourcing in action. We'll use the cat command to create the script:
me@linuxbox:~$ cat > bin/cd_script
#!/bin/bash
cd /usr/local
echo $PWD
Press Ctrl-d to signal end-of-file to the cat command. Next, we will set the file attributes to make the script executable:
me@linuxbox:~$ chmod +x bin/cd_script
Finally, we will run the script:
me@linuxbox:~$ cd_script
/usr/local
me@linuxbox:~$
The script executes and by doing so it changes the directory to /usr/local and then outputs the name of the current working directory which is /usr/local. Notice however, that when the shell prompt returns, we are still in our home directory. Why is this? While it may appear at first that the script did not change directories, it did as evidenced by the output of the PWD shell variable. So why isn't the directory still changed when the script terminates?
The answer lies in the fact that when you execute a shell script, a new copy of the shell is launched and with it comes a new copy of the environment. When the script finishes, the copy of the shell is destroyed and so is its environment As a general rule, a child process, such as the shell running a script, is not permitted to modify the environment of the parent process.
So if we actually wanted to change the working directory in the current shell, we would need to use the source command and to read the contents of our script. Note that the name of the source command may be abbreviated as a single dot followed by a space.
me@linuxbox:~$ . cd_script
/usr/local
me@linuxbox:/usr/local$
By sourcing the file, the working directory is changed in current shell as we can see by the trailing portion of the shell prompt. Be aware that, by default, the shell will search the directories listed in the PATH variable for the file to be read. Files that are read by source do not have to be executable, nor do they need to start with the shebang (i.e. #!) mechanism.
Implementing Configuration Files In Scripts
Now that we see how sourcing works, let's try our hand at writing a script that uses a the source command to read a configuration file.
In part 4 of the Getting Ready For Ubuntu 10.04 series, we wrote a script to perform a backup of our system to an external USB disk drive. The script looked like this:
#!/bin/bash
# usb_backup # backup system to external disk drive
SOURCE="/etc /usr/local /home"
DESTINATION=/media/BigDisk/backup
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
You will notice that the source and destination directories are hard-coded into the SOURCE and DESTINATION constants at the beginning of the script. We will remove these and modify the script to read a configuration file instead:
#!/bin/bash
# usb_backup2 # backup system to external disk drive
CONFIG_FILE=~/.usb_backup.conf
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
Now we can create a configuration file named ~/.usb_backup2.conf that contains these two lines:
SOURCE="/etc /usr/local /home"
DESTINATION=/media/BigDisk/backup
When we run the script, the contents of the configuration file is read and the SOURCE and DESTINATION constants are added to the script's environment just as though the lines were in the text of the script itself. The
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
construct is a common way to set up the reading of a file. In fact, if you look at your ~/.profile or ~/.bash_profile startup files, you will probably see something like this:
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
which is how your environment is established when you log in at the console.
While our script in its current form requires the configuration file to define the SOURCE and DESTINATION constants, it's easy to make the use of the file optional by setting default values for the constants if the configuration file is either missing or does not contain the required definitions. We will modify our script to set default values and also support an optional command line option (-c) to specify an optional, alternate configuration file name:
#!/bin/bash
# usb_backup3 # backup system to external disk drive
# Look for alternate configuration file
if [[ $1 == -c ]]; then
CONFIG_FILE=$2
else
CONFIG_FILE=~/.usb_backup.conf
fi
# Source configuration file
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
# Fill in any missing values with defaults
SOURCE=${SOURCE:-"/etc /usr/local /home"}
DESTINATION=${DESTINATION:-/media/BigDisk/backup}
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
Code Libraries
Since the files read by the source command can contain any valid shell commands, source is often used to load collections of shell functions into scripts. This allows central libraries of common routines to be shared by multiple scripts. This can make code maintenance considerably easier.
Security Considerations
On the other hand, since sourced files can contain any valid shell command, care must be take to make sure that nothing malicious is placed in a file that is to be sourced. This holds especially true for any script that is to be run by the superuser. When writing such scripts, make sure that the super user owns the file to be sourced and that the file is not world-writable. Some code like this could do the trick:
if [[ -O $CONFIG_FILE ]]; then
if [[ $(stat --format %a $CONFIG_FILE) == 600 ]]; then
. $CONFIG_FILE
fi
fi
Further Reading
The bash man page:
The Linux Command Line:
Why Use Configuration Files?
Since shell scripts are just ordinary text files, why should we bother with additional text configuration files? There are a couple of reasons that you might want to consider them:
- Having configuration files removes the need to make changes to a script. There may be cases where you want to insure that a script remains in its original form.
- In particular, you may want to have a script that is shared by multiple users and each user has a specific desired configuration. Using individual configuration files prevents the need to have multiple copies of the script, thus making administration easier.
Sourcing Files
Implementing configuration files in most programming languages is a fairly complicated undertaking, as you must write code to parse the configuration file's content. In the shell, however, parsing is automatic because you can use regular shell syntax.
The shell builtin command that makes this trick work is named source. The source command reads a file and processes its content as if it were coming from the keyboard. Let's create a very simple shell script to demonstrate sourcing in action. We'll use the cat command to create the script:
me@linuxbox:~$ cat > bin/cd_script
#!/bin/bash
cd /usr/local
echo $PWD
Press Ctrl-d to signal end-of-file to the cat command. Next, we will set the file attributes to make the script executable:
me@linuxbox:~$ chmod +x bin/cd_script
Finally, we will run the script:
me@linuxbox:~$ cd_script
/usr/local
me@linuxbox:~$
The script executes and by doing so it changes the directory to /usr/local and then outputs the name of the current working directory which is /usr/local. Notice however, that when the shell prompt returns, we are still in our home directory. Why is this? While it may appear at first that the script did not change directories, it did as evidenced by the output of the PWD shell variable. So why isn't the directory still changed when the script terminates?
The answer lies in the fact that when you execute a shell script, a new copy of the shell is launched and with it comes a new copy of the environment. When the script finishes, the copy of the shell is destroyed and so is its environment As a general rule, a child process, such as the shell running a script, is not permitted to modify the environment of the parent process.
So if we actually wanted to change the working directory in the current shell, we would need to use the source command and to read the contents of our script. Note that the name of the source command may be abbreviated as a single dot followed by a space.
me@linuxbox:~$ . cd_script
/usr/local
me@linuxbox:/usr/local$
By sourcing the file, the working directory is changed in current shell as we can see by the trailing portion of the shell prompt. Be aware that, by default, the shell will search the directories listed in the PATH variable for the file to be read. Files that are read by source do not have to be executable, nor do they need to start with the shebang (i.e. #!) mechanism.
Implementing Configuration Files In Scripts
Now that we see how sourcing works, let's try our hand at writing a script that uses a the source command to read a configuration file.
In part 4 of the Getting Ready For Ubuntu 10.04 series, we wrote a script to perform a backup of our system to an external USB disk drive. The script looked like this:
#!/bin/bash
# usb_backup # backup system to external disk drive
SOURCE="/etc /usr/local /home"
DESTINATION=/media/BigDisk/backup
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
You will notice that the source and destination directories are hard-coded into the SOURCE and DESTINATION constants at the beginning of the script. We will remove these and modify the script to read a configuration file instead:
#!/bin/bash
# usb_backup2 # backup system to external disk drive
CONFIG_FILE=~/.usb_backup.conf
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
Now we can create a configuration file named ~/.usb_backup2.conf that contains these two lines:
SOURCE="/etc /usr/local /home"
DESTINATION=/media/BigDisk/backup
When we run the script, the contents of the configuration file is read and the SOURCE and DESTINATION constants are added to the script's environment just as though the lines were in the text of the script itself. The
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
construct is a common way to set up the reading of a file. In fact, if you look at your ~/.profile or ~/.bash_profile startup files, you will probably see something like this:
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
which is how your environment is established when you log in at the console.
While our script in its current form requires the configuration file to define the SOURCE and DESTINATION constants, it's easy to make the use of the file optional by setting default values for the constants if the configuration file is either missing or does not contain the required definitions. We will modify our script to set default values and also support an optional command line option (-c) to specify an optional, alternate configuration file name:
#!/bin/bash
# usb_backup3 # backup system to external disk drive
# Look for alternate configuration file
if [[ $1 == -c ]]; then
CONFIG_FILE=$2
else
CONFIG_FILE=~/.usb_backup.conf
fi
# Source configuration file
if [[ -f $CONFIG_FILE ]]; then
. $CONFIG_FILE
fi
# Fill in any missing values with defaults
SOURCE=${SOURCE:-"/etc /usr/local /home"}
DESTINATION=${DESTINATION:-/media/BigDisk/backup}
if [[ -d $DESTINATION ]]; then
sudo rsync -av \
--delete \
--exclude '/home/*/.gvfs' \
$SOURCE $DESTINATION
fi
Code Libraries
Since the files read by the source command can contain any valid shell commands, source is often used to load collections of shell functions into scripts. This allows central libraries of common routines to be shared by multiple scripts. This can make code maintenance considerably easier.
Security Considerations
On the other hand, since sourced files can contain any valid shell command, care must be take to make sure that nothing malicious is placed in a file that is to be sourced. This holds especially true for any script that is to be run by the superuser. When writing such scripts, make sure that the super user owns the file to be sourced and that the file is not world-writable. Some code like this could do the trick:
if [[ -O $CONFIG_FILE ]]; then
if [[ $(stat --format %a $CONFIG_FILE) == 600 ]]; then
. $CONFIG_FILE
fi
fi
Further Reading
The bash man page:
- BUILTIN COMMANDS (source command)
- CONDITIONAL EXPRESSIONS (testing file attributes)
The Linux Command Line:
- Chapter 35 - Strings And Numbers (parameter expansions to set default values)